Even if you aren’t planning to sell your house soon, you want your home and property to be the best looking home in the neighborhood. Curb appeal begins at the curb, not at the front door, so your driveway needs to look as good as your home. Cracks in either concrete or asphalt can happen for a variety of reasons, and the sooner they are repaired and sealed up, the better chance you will have to maintain the integrity of your driveway. There are some simple steps to follow when deciding to tackle your own driveway crack repair.
Your concrete surface is a solid one, but the surrounding ground expands and contracts with the fluctuations in the weather, which is the major reason why your concrete can begin cracking. There are other reasons as well, such as not having the ground properly prepared with a gravel bed prior to pouring the driveway, or having the rebar, the iron bars embedded into the concrete for strength, come into contact with moisture and begin to rust. Regardless of the reasons, if you follow these steps, you can repair your driveway and have it looking good as new in a few days.
- Make sure the temperature is above fifty degrees for at least 24 hours.
- Pressure wash the surface to remove loose concrete and other debris. Make sure to remove any unstable concrete.
- Using a trowel, fill in the cracks larger than 1/8 inch wide. Run the trowel through the patch to remove any air bubbles.
- Apply pressure to the repair to smooth the surface and feather the edges into the surrounding concrete.
- Allow the repair to dry thoroughly before driving on it, or before applying a sealer.
Blacktop driveways are prone to some of the same conditions for cracking as concrete ones. The surrounding ground will expand and contract due to the fluctuations in the weather.
- Air temperature should be between seventy and ninety degrees in order to have the best possible outcome.
- Pressure wash the driveway to remove any debris and droppings from your automobiles, such as grease, oil, and salt.
- Fill in any cracks larger than 1/8 inch wide, following the instructions on the product.
- Allow the filled cracks to dry for at least 24 hours before driving on the surface.
- Finish by applying a sealer to preserve your asphalt and keep it from fading.
If you follow these steps, you can easily perform your own driveway crack repair.